CSP600 Single Punch Tablet Press
CSP600 Single Punch Tablet Press has absorbed foreign advanced technology to aid in its developing. It is a continuous, automatic tablet machine that is designed for departments such as pharmacy, chemical industry, electrical industry, food, laboratory which needs to make powder, and granular raw material into tablets.
- Introduction:
CSP600 Single Punch Tablet Press has absorbed foreign advanced technology to aid in its developing. It is a continuous, automatic tablet machine that is designed for departments such as pharmacy, chemical industry, electrical industry, food, laboratory which needs to make powder, and granular raw material into tablets.
Its advantage is: The machine structure is rational and small, it’s very easy to operate, and it operates at a high utilization ratio. The machine is capable of utilize a high amount of pressure to reduce the weight difference between the tablets while maintaining a low noise level. The machine also provides a continuous control over the loading of the raw materials, and the thickness of tablet. Each and every function of this machine can be compared favorably with the imported machines.
This machine has adopted multiple novelty in its design, thus guaranteed safety and efficiency during the production process.
- Main Features:
Entirely enclosed structure of the machine is design to avoid cross dust pollution, meet the GMP.
The Machine has safety protector installed, is also more rationally humanized.
Four posts cuboids structure of the machine is designed for larger operation space.
Outstanding carry capacity is suitable for variety range of the tablet production.
Single transmission system design makes the machine operates steadier and at a lower noise level.
- Technical Parameter:
| Number of Dies (set) | 1 set | 2 sets | 3 sets |
| Max Compressing Diameter (mm) | 25mm | 10mm | 7mm |
| Max Production Capacity (Tablet/minute) | 60(Tablet /minute) | 120(Tablet /minute) | 180(Tablet /minute) |
| Max Pressure (Kilo-Newton) | 50 (Kilo-Newton) | ||
| Max Depth of Filling (mm) | 20mm | ||
| Range of Thickness of Tablet (mm) | 0.5-8mm | ||
| Power Source (KW) | Single-phase 220V/50Hz，1.5KW | ||
| Outline Dimensions (mm) | 580×500×830mm | ||
| Net Weight (kg) | 150kg | ||
Related Products
-
YK Series Granulating Machine
This machine can make granules from wet powder materials or break down the dry lumpish material, which is widely used by the industries of pharmacy, chemical, and food stuff etc.
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
ZPW23 GMP Standard Double Layer Tablet Press
The machine is a double-pressing automatically revolving piece-pressing machine which could make grain be pressed to be round piece ,be carved characters ,special shapes and double color piece prescription .It is mainly used in manufacturing piece prescription for pharmaceutical industry enterprises like chemical industry ,foods, electronics .(Note: when manufacturing double color piece ,it only need replacing components and adding powder absorbing apparatus which greatly lowers the cost and raises profit) .
-
FZ150 Series Grinding and Granulating Machine
FZ series grinding and granulating machine is used in pharmaceutical, food, fine chemical processing industries. This machine reaches the world advanced level and conforms to the GMP specification. It is completely made of stainless steel material.
Reviews
There are no reviews yet.