HD Series Multi Directional Motions Mixer
HDA Series Multi-directional Motions Mixer is a novelty material mixer, which is extensively used in Pharmacy, Chemical industry, Metallurgical Industry, Food, Light industry, Agriculture and so on. The machine can mix powder or granules very evenly, so that the mixed materials can reach their best effect.
Introduction:
HDA Series Multi-directional Motions Mixer is a novelty material mixer, which is extensively used in Pharmacy, Chemical industry, Metallurgical Industry, Food, Light industry, Agriculture and so on. The machine can mix powder or granules very evenly, so that the mixed materials can reach their best effect.
Working principle:
The mixing barrel is supported by the driving and driven shafts which are crossed in space and also vertical to each other, and are respectively connected by Y-type universal joints, so that the mixing barrel makes unique translation, turning, turning over motions in Three-dimensional space, thereby speeds up the flow and diffusion of the materials being mixed, while avoids the specific gravity segregation of materials due to the action of centrifugal force in an ordinary mixer, and ensures the materials to reach an ideal mixing within a short time.
Characteristics:
-It has a unique driven shaft servo mechanism, so that the whole machine runs stably and reliably with low noise. -The equipment does not need a foundation and features convenient erection and maintenance as well as long service life. -It can ensure a good mixing effect and short mixing time. The evenness of mixing reaches above 99.5%. -Its charge coefficient reaches 85%, more than double that of an ordinary rotary mixer. -Thanks to its low height and small rotating space, it usually does not need skip floor. -The eccentric cone design of the discharge end of the mixing barrel ensures discharge free of dead corner and residue, so it is easy to clean and conforms to the requirement of GMP. -HDA series multi-directional motions mixer can start in low speed, run smoothly in rated speed, timing and deceleration for stop. Automatic shutdown location of the machine is the best location for charging and discharging
Main technical parameter:
| Model | HDA-5 | HDA-20 | HDA-50 | HDA-100 | HDA-200 | HDA-400 | HDA-600 | HDA-800 | HDA-1000 | HDA-1500 |
| Volume of mixing barrel (L) | 5 | 20 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | 1500 |
| Max. charge volume (L) | 4 | 17 | 40 | 85 | 170 | 340 | 500 | 680 | 850 | 1275 |
| Max. charge weight(kg) | 4 | 15 | 40 | 80 | 100 | 200 | 300 | 400 | 500 | 750 |
| Main shaft speed(rpm) | 20 | 20 | 17 | 14 | 14 | 12 | 12 | 10 | 10 | 10 |
| Motor power(kW) | 0.75 | 0.75 | 1.1 | 2.2 | 3 | 4 | 5.5 | 7.5 | 7.5 | 11 |
| Weight of whole machine(kg) | 90 | 100 | 200 | 650 | 900 | 1350 | 1550 | 2500 | 2650 | 4000 |
| Shape dimension dynamic (long x wide x high(mm)) | 900× 700× 650 | 970× 780× 700 | 1200× 1100× 1200 | 1360× 1500× 1530 | 1800× 1600× 1700 | 2200× 1900× 1850 | 2400× 2100× 2050 | 2600× 2500× 2550 | 2800× 2600× 2800 | 3400× 3200× 3100 |
Related Products
-
YK Series Granulating Machine
This machine can make granules from wet powder materials or break down the dry lumpish material, which is widely used by the industries of pharmacy, chemical, and food stuff etc.
-
ZPW21A Series Rotary Tablet Press
This machine is applied to press all kinds of particle material into tablets and its greatest advantage is that it can press special-shaped tablets in all geometric shapes, double tablets, ring table’s and tablets with figures at both sides besides round tablets. Turret may be mounted with 21 pair of movable dies, so 21 tablets can be pressed at one turn. It is allowed to adjust the turret speed, stuffing depth of material and thickness of tablets during pressing and sample of tablets can be selected and examined. Pressure to pressing tablets is set by hydraulic system; to shish pressure gauge indication is attached. Overload protective device is mounted inside the hydraulic system and the system sill automatically stops when overloaded. Separate powder-absorbing box is supplied with the machine. It may absorb the powder from the operation of the machine to avoid bonding and clogging of powder and to recover raw material for refuse. This machine is a new type developed by ourselves during 1980’s and has been sold to international market.
-
CGN208D Semi Automatic Capsule Filling Machine
Integrating machine, electricity and air, it adopts micro-computer PLC control with touch screen panel operation, it adjuststhe speed by frequency conversion, equipped with electric auto counting device to complete the placing, separating, filling and
locking for capsule respectively So it can decrease the working intensity and increase the working efficiency, this kind of machines meet the requirement of pharmaceutical sanitary, it is suitable for filling powder and granular material in pharmacy and health food industry into capsule -
ZPW23 GMP Standard Double Layer Tablet Press
The machine is a double-pressing automatically revolving piece-pressing machine which could make grain be pressed to be round piece ,be carved characters ,special shapes and double color piece prescription .It is mainly used in manufacturing piece prescription for pharmaceutical industry enterprises like chemical industry ,foods, electronics .(Note: when manufacturing double color piece ,it only need replacing components and adding powder absorbing apparatus which greatly lowers the cost and raises profit) .
Reviews
There are no reviews yet.