SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
- Features:
Easy to operate and adjust,well selectivity. Can extract out requested component according to control pressure and temperature.
Low operating temperature. Operation often happen under room temperature, which is much better for Heat-sensitive Materials. Because during extraction process, it has avoid “when oxygen oxygenation” and “when light reaction”, product can keep its natural tastes.
Finish within one step, CO2 won’t be left on the products,CO2 is one kind gas of non-poisonous, tasteless, inflammable, cheap and can be cycle use.
CO2 can be recycled, and be equipped with return circuit which saves gas.Adopt new methods of fluid distribution uniform fluid distribution, which makes CO2 fluid and solute uniform contact to speed up the dissolved, shorten extraction time, increase production
Each kettle has function of measuring and controlling temperature system, which can effectively and accuracy control the temperature.
The safety valve can protect the safety of the machine and operator, and the pressure safety display to ensure that the machine working in a safe environment
High precision pressure valve to ensure the tightness of the machine,make good extract effect.
- Technical Parameters:
| Model | SH120-50-01 |
| Max. extract pressure | 50MPa |
| Single extract cylinder volume | 1L |
| Extraction temperature | Room temp – 75℃ |
| Max. flow | 0-50L/h(adjustable) |
| Kettle material | 1Cr18Ni9Ti |
| Separation kettle volume | 600ml * 2sets |
| Separation kettle pressure | 30MPa |
| CO2 store tank volume | 3L |
| CO2 store tank pressure | 16MPa |
| Dimension | 1700*1520*1000mm |
| Weight | 300KG(Approximate) |
Related Products
-
VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
-
ZP1100 Series Rotary Tablet Press
ZP1100 series rotary tablet press is a new generation product. Widely applicable to industries such as pharmaceutical, foodstuff and chemicals for pressing the granular materials into round, irregular or double side engraved tablets.
-
ZP35 Series Rotary Tablet Press Machine
This machine is a double-press type, continuous automatic tablet press for pressing granular raw materials into round tablets. It is mainly used in pharmaceutical, herbal, food and chemical industries.
-
CSP600 Single Punch Tablet Press
CSP600 Single Punch Tablet Press has absorbed foreign advanced technology to aid in its developing. It is a continuous, automatic tablet machine that is designed for departments such as pharmacy, chemical industry, electrical industry, food, laboratory which needs to make powder, and granular raw material into tablets.
Reviews
There are no reviews yet.