Soft Tube Filling and Sealing Machine
This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It’s ideal equipment for plumbum tube, ALU tube, plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.
- Product Introduction:
This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It’s ideal equipment for plumbum tube, ALU tube, plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.
- Features:
With 12 stations and matching with manipulator, the machine is able to meet different type of tail folding, sealing requirements of plumbum tube, Alu tube, plastic tube and laminated tubes. It is a multi-purpose machine.
Tube feeding, eye marking, tube interior cleaning (optional), material filling, sealing (tail folding), batch number printing, finished products discharging can be performed automatically (the whole procedure).
Servo control makes it precise and convenient to adjust the filling amount by touch screen.
According to the different length of the tube, height of tube chamber can be adjusted easily by motor. With external reversal feeding system, makes tube charging more convenient and tidy.
The mechanical linkage photo sensor precision tolerance is less than 0.2mm. The chromatic aberration scope between tube and eye mark is reduced.
Photo-electronic, electric, pneumatic integrative control is applied with the machine. No tube, no filling. It gives an alarm when low pressure occurs. The machine stops automatically if tube error or open the safety door.
Three-layer jacket instant heater, it won’t damage the pattern on outer wall of tube and achieves firm and beautiful sealing effect.
- Main technical parameters:
| Model | 60B |
| Tube Material | Plastic tube, laminated tube, ALU tube and plumbum tube |
| Tube Diameter | Φ10mm-Φ60mm |
| Tube Length | 50-300mm (customizable) |
| Filling Volume | 5-500ml/piece (Adjustable) |
| Filling Accuracy | ≤±1% |
| Product Capacity (Pcs/min) | 30-60 0.1m3/min |
| Air Supply | 0.55-0.65Mpa |
| Motor Power | 2kw (380V/220V 50Hz) |
| Heat Sealing Power | 3kw |
| Overall Dimension (mm) | 2507*1040*1910mm (L*W*H) |
| Machine Weight (kg) | 1100kg |
Related Products
-
NJP Full Auto Capsule Filling Machine
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopts optimization design combined the characteristics of Chinese medicine and requirements of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine, it increase the lifting mechanism that easy to clean, it saves the cost and manpower for the enterprise that need volume-produce
-
TDP-1.5/5/6 Single Punch Tablet Press
This machine is designed for pressing round tablets from various granular materials, applicable to be used for research and development and to small scale production. As its feature, it is an all desk-top continuous press driven by motor or man power. Only one set of punch and die is mounted. The depth of the filling material and the thickness of the tablets can be adjusted.
-
ZP15B Big Tablet Rotary Tablet Press
This machine’s mainly feature is suitable for big diameter tablet production; it can press the granules material into round shape tablet, circle shape tablet, irregular shape tablet and double side printing tablet with big diameter. There are fifteen pieces punch which are separately model dies, the tablet production speed, tablet thickness, material filling quantity and filling depth can be adjusted, it has function of auto stopping for overpressure condition to protect itself, and it has individual powder sucking box, which can suck the powder and reused the medicine powder, it fully meet the GMP request and very popular in the world market.
-
ZP35 Series Rotary Tablet Press Machine
This machine is a double-press type, continuous automatic tablet press for pressing granular raw materials into round tablets. It is mainly used in pharmaceutical, herbal, food and chemical industries.
Reviews
There are no reviews yet.