Fume Hood
It is widely used in scientific research, biological & chemical experiment, electron, precision apparatus, instrument and so on.
Characteristics:
It is widely used in scientific research, biological & chemical experiment, electron, precision apparatus, instrument and so on.
To control exhausting the organic solvent and gas with poisonous, deleterious, flammable, to protect operator.
Parameter:
| Parameter/Model | TGH-1200 | TGH-1500 | TGH-1800 | ||
| Air displacement | 1200m3/h | 1500m3/h | 2000m3/h | ||
| Air tightness | 500Pa leakage rate≤10%(in 30min) | ||||
| Equiblast air volume | ≥0.4m/s | ||||
| Noisiness | ≤62dB(A) | ||||
| Vibration half peak value | ≤4μm | ||||
| Illumination | ≥300Lx | ||||
| Power supply | AC220V 50HZ | ||||
| Rated power consumption | 0.4kw | 0.6kw | 0.8kw | ||
| Weight | 150kg | 200kg | 250kg | ||
| Dimension of working area (W1xD1xH1) | 1000x650x800 | 1300x650x800 | 1600x650x800 | ||
| Overall dimension(W1xD1xH1) | 1200x800x2350 | 1500x800x2350 | 1800x800x2350 | ||
| Fluorescent lamp | 30Wx2 | 40Wx2 | 40Wx3 | ||
Related Products
-
Pass Box
Pass box is a kind of auxiliary equipment of clean room, used for cargo transfer between clean areas,
clean areas and unclean areas, they can reduce the times to open the door so as to ensure the cleanliness in the clean room.
the pass box is interlock on the both doors,and can not be opened at one time.they can prevent air pollution.
Tip: this model pass box can’t completely to stop dust entrance.
- Air shower pass box:
Air shower pass box is high efficiency filter and fan built-in in normal pass box.
It is suitable for cargo transfer from clean areas to unclean areas or from low clean areas to high clean areas.
- Laminar flow pass box:
It is also suitable for cargo transfer from clean areas to unclean areas or from low clean areas to high clean areas.
But it is mainly applied to the Biopharmaceutical industry,and through the laminar flow filter to form the class100 clean area in laminar flow pass box,thus effectively prevent the pollution into clean room.
-
HPL wall
The HPL partition wall is a structure with a thickness of 45 mm, made of 2 x 4 mm thick external HPL panels and internal insulation, which vary according to the project requirements.
Each panel made is completely sealed on all 4 sides, using extruded aluminum profiles, designed to create the structure and complete closure of the internal insulation.
ultra-med supplies different types of insulation: rock wool (RW), polystyrene (EPS), aluminum and paper honeycomb (HC), polyurethane (PUR).
In all cases, the densities of such insulations are extremely high, so as to guarantee superior mechanical stability of the wall itself.
-
LED Lighting Systems
The lighting fixtures installed on clip-in ceilings are positioned on the same structure, then sealed with neutral white silicone on the clean room side, along the entire perimeter of the lamp. The lighting fixture is mechanically locked by steel edges, to guarantee an absolutely firm position and resistance to overpressure.
Housing steel sheet epoxy polyester powder coated in white color RAL9016, high quality Opal diffuser increases light transmission and eliminate the pixelization.
Diffuser is placed on a single die-cast aluminum frame which looks aesthetically good without any joint marks.
Wattage: 36W / 40W / 72W / 80W
CCT: 3000K / 4000K / 5700K / 6000K
CRI: >80
LED Life: 50,000 hours
-
Sliding doors
Sliding door consisting of a 45-50 mm extruded aluminum frame and a panel made with the same as the partition walls material, allowing total flush-fitting between the components and the wall itself.
It is simple to assemble as both the electric drive unit and electric panel are housed in a single extruded aluminum cabinet that, when positioned alongside the aluminum perimeter profiles of the door wings and the connection profiles, creates a locking element that blends harmoniously with the clean room environment.
This system can be equipped with a back-up battery which guarantees opening in case of power failure.
Safe and extremely silent thanks to the 100-240 V brushless motor inverter
(50-60Hz) using switch mode technology.
Opening speed 0.8 m/s.
Control unit with microprocessor logic and anti-crushing device complete the features of this clean room sliding door mechanism.
The end customer can choose from the various door opening and control options.
Manual non-motorized version also available.
Reviews
There are no reviews yet.