FZ150 Series Grinding and Granulating Machine
FZ series grinding and granulating machine is used in pharmaceutical, food, fine chemical processing industries. This machine reaches the world advanced level and conforms to the GMP specification. It is completely made of stainless steel material.
- General description:
FZ series grinding and granulating machine is used in pharmaceutical, food, fine chemical processing industries. This machine reaches the world advanced level and conforms to the GMP specification. It is completely made of stainless steel material.
- Usage:
Pharmacy:
Granulating of wet material
Granulating of dry material
Unqualified tablets to be recycled can be granulated according to the requirement of granularity.
Food:
1 Grinding of biscuit for recycling
Other:
Grinding and granulating of rough raw material
Grinding and granulating of lump raw material
- Working principle:
The material to be processed enters into the conical working chamber via the feeding hopper. The rotating knife plays a whirling action to the material, and throws the grains to the sieve mesh surface. The material is ground by the shearing action produced by the rotating blade and the sieve mesh, and discharge through the sieve apertures. The grain size can be adjusted by the sieve mesh number, the gap between rotating knife and sieve mesh, and the speed of rotating knife. The means of adjustment is flexible, and the use is convenient.
- Features:
Thoroughly solving the tough problem of material contained by the debris of worn sieve mesh in a pendulum-type granulating machine.
The unique patented shaft sealing technology ensures no leakage of lubrication oil.
Easy to control granularity.
No retention dead corner, no material overheating.
Less dust, no vibration, low noise.
High efficiency. Energy saving, large production capacity.
Attractive appearance, easy to clean.
- Technical Parameters
| Model | FZ150 FZB-150(A) | FZ300 FZB-300 (A) | FZ-450 FZB-450(A) | FZ-700 FZB-700 (A) | FZ-1000 FZB-1000(A) | ||||||
| Power (kw) | 1.5 | 1.5 | 2.2 | 3 | 5.5 | ||||||
| Capacity of grinding and granulating (kg/h) | 15-150 | 30-300 | 45-450 | 70-700 | 100-1000 | ||||||
| Granularity | 6-80mm | ||||||||||
| Drive seat temperature rise | <30℃ | ||||||||||
| Range of speed regulation | FZ series 2800rpm FZB series 300-3600rpm | ||||||||||
| Overall dimension (L x W x H) (mm) | 720x445x1345 | 810x445x1345 | 920x445x1430 | 100x500x1530 | 1100x600x187 | ||||||
| Height of discharge hopper from the ground level | 650mm | 650mm | 690mm | 690mm | 700mm | ||||||
Related Products
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
Soft Tube Filling and Sealing Machine
This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It’s ideal equipment for plumbum tube, ALU tube, plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.
-
NJP Full Auto Capsule Filling Machine
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopts optimization design combined the characteristics of Chinese medicine and requirements of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine, it increase the lifting mechanism that easy to clean, it saves the cost and manpower for the enterprise that need volume-produce
Reviews
There are no reviews yet.