HD Series Multi Directional Motions Mixer
HDA Series Multi-directional Motions Mixer is a novelty material mixer, which is extensively used in Pharmacy, Chemical industry, Metallurgical Industry, Food, Light industry, Agriculture and so on. The machine can mix powder or granules very evenly, so that the mixed materials can reach their best effect.
Introduction:
HDA Series Multi-directional Motions Mixer is a novelty material mixer, which is extensively used in Pharmacy, Chemical industry, Metallurgical Industry, Food, Light industry, Agriculture and so on. The machine can mix powder or granules very evenly, so that the mixed materials can reach their best effect.
Working principle:
The mixing barrel is supported by the driving and driven shafts which are crossed in space and also vertical to each other, and are respectively connected by Y-type universal joints, so that the mixing barrel makes unique translation, turning, turning over motions in Three-dimensional space, thereby speeds up the flow and diffusion of the materials being mixed, while avoids the specific gravity segregation of materials due to the action of centrifugal force in an ordinary mixer, and ensures the materials to reach an ideal mixing within a short time.
Characteristics:
-It has a unique driven shaft servo mechanism, so that the whole machine runs stably and reliably with low noise. -The equipment does not need a foundation and features convenient erection and maintenance as well as long service life. -It can ensure a good mixing effect and short mixing time. The evenness of mixing reaches above 99.5%. -Its charge coefficient reaches 85%, more than double that of an ordinary rotary mixer. -Thanks to its low height and small rotating space, it usually does not need skip floor. -The eccentric cone design of the discharge end of the mixing barrel ensures discharge free of dead corner and residue, so it is easy to clean and conforms to the requirement of GMP. -HDA series multi-directional motions mixer can start in low speed, run smoothly in rated speed, timing and deceleration for stop. Automatic shutdown location of the machine is the best location for charging and discharging
Main technical parameter:
| Model | HDA-5 | HDA-20 | HDA-50 | HDA-100 | HDA-200 | HDA-400 | HDA-600 | HDA-800 | HDA-1000 | HDA-1500 |
| Volume of mixing barrel (L) | 5 | 20 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | 1500 |
| Max. charge volume (L) | 4 | 17 | 40 | 85 | 170 | 340 | 500 | 680 | 850 | 1275 |
| Max. charge weight(kg) | 4 | 15 | 40 | 80 | 100 | 200 | 300 | 400 | 500 | 750 |
| Main shaft speed(rpm) | 20 | 20 | 17 | 14 | 14 | 12 | 12 | 10 | 10 | 10 |
| Motor power(kW) | 0.75 | 0.75 | 1.1 | 2.2 | 3 | 4 | 5.5 | 7.5 | 7.5 | 11 |
| Weight of whole machine(kg) | 90 | 100 | 200 | 650 | 900 | 1350 | 1550 | 2500 | 2650 | 4000 |
| Shape dimension dynamic (long x wide x high(mm)) | 900× 700× 650 | 970× 780× 700 | 1200× 1100× 1200 | 1360× 1500× 1530 | 1800× 1600× 1700 | 2200× 1900× 1850 | 2400× 2100× 2050 | 2600× 2500× 2550 | 2800× 2600× 2800 | 3400× 3200× 3100 |
Related Products
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
ZP15B Big Tablet Rotary Tablet Press
This machine’s mainly feature is suitable for big diameter tablet production; it can press the granules material into round shape tablet, circle shape tablet, irregular shape tablet and double side printing tablet with big diameter. There are fifteen pieces punch which are separately model dies, the tablet production speed, tablet thickness, material filling quantity and filling depth can be adjusted, it has function of auto stopping for overpressure condition to protect itself, and it has individual powder sucking box, which can suck the powder and reused the medicine powder, it fully meet the GMP request and very popular in the world market.
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
-
LF Series Square Cone Mixing Machine
The LF series square cone mixing machine is a novel material mixer extensively used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed material can meet best effect.
Reviews
There are no reviews yet.