LF Series Square Cone Mixing Machine
The LF series square cone mixing machine is a novel material mixer extensively used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed material can meet best effect.
Introduction:
The LF series square cone mixing machine is a novel material mixer extensively used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed material can meet best effect.
Working principle:
Materials are charged into a closed square cone mixing barrel. The symmetrical axes of hopper and axes of rotating shaft form an included angle, while materials with different constituents are making three dimensional space motions in the closed hopper and producing strong rolling, diffusion and contraction to achieve the best effect of mixing.
Features:
The whole machine features novel design, compact structure, and good appearance. The evenness of mixing reaches 99%, and the volume charge coefficient reaches 0.8
Low rotating height, smooth running, reliable performance and easy operation.
Highly polished inner and outer surfaces of barrel without dead corner, easy to discharge and clean with no cross contamination, conforming to the requirement of GMP.
Technical parameter:
| Model | LF300 | LF500 | LF1000A | LF1500A | LF2000A | LF3000A |
| Volume of mixing barrel (L) | 300 | 500 | 1000 | 1500 | 2000 | 3000 |
| Max. charge volume (L) | 240 | 400 | 800 | 1200 | 1600 | 2400 |
| Max. charge weight (kgs) | 150 | 250 | 500 | 750 | 1000 | 1500 |
| Main shaft speed (rpm) | 14 | 13 | 12 | 10 | 10 | 8 |
| Motor power (kw) | 1.5 | 2.2 | 4 | 5.5 | 7.5 | 11 |
| Weight of whole machine (kg) | 600 | 750 | 1200 | 1650 | 2000 | 3000 |
| Overall dimension (dynamic)
(L x W x H) (mm) |
1850x1280x1980 | 2200x1530x2220 | 2800x2000x2820 | 2980x2330x3070 | 3300x2550x3280 | 3800x3000x3800 |
Related Products
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
-
ZPW23 GMP Standard Double Layer Tablet Press
The machine is a double-pressing automatically revolving piece-pressing machine which could make grain be pressed to be round piece ,be carved characters ,special shapes and double color piece prescription .It is mainly used in manufacturing piece prescription for pharmaceutical industry enterprises like chemical industry ,foods, electronics .(Note: when manufacturing double color piece ,it only need replacing components and adding powder absorbing apparatus which greatly lowers the cost and raises profit) .
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
ZPW21A Series Rotary Tablet Press
This machine is applied to press all kinds of particle material into tablets and its greatest advantage is that it can press special-shaped tablets in all geometric shapes, double tablets, ring table’s and tablets with figures at both sides besides round tablets. Turret may be mounted with 21 pair of movable dies, so 21 tablets can be pressed at one turn. It is allowed to adjust the turret speed, stuffing depth of material and thickness of tablets during pressing and sample of tablets can be selected and examined. Pressure to pressing tablets is set by hydraulic system; to shish pressure gauge indication is attached. Overload protective device is mounted inside the hydraulic system and the system sill automatically stops when overloaded. Separate powder-absorbing box is supplied with the machine. It may absorb the powder from the operation of the machine to avoid bonding and clogging of powder and to recover raw material for refuse. This machine is a new type developed by ourselves during 1980’s and has been sold to international market.
Reviews
There are no reviews yet.