LF Series Square Cone Mixing Machine
The LF series square cone mixing machine is a novel material mixer extensively used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed material can meet best effect.
Introduction:
The LF series square cone mixing machine is a novel material mixer extensively used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed material can meet best effect.
Working principle:
Materials are charged into a closed square cone mixing barrel. The symmetrical axes of hopper and axes of rotating shaft form an included angle, while materials with different constituents are making three dimensional space motions in the closed hopper and producing strong rolling, diffusion and contraction to achieve the best effect of mixing.
Features:
The whole machine features novel design, compact structure, and good appearance. The evenness of mixing reaches 99%, and the volume charge coefficient reaches 0.8
Low rotating height, smooth running, reliable performance and easy operation.
Highly polished inner and outer surfaces of barrel without dead corner, easy to discharge and clean with no cross contamination, conforming to the requirement of GMP.
Technical parameter:
| Model | LF300 | LF500 | LF1000A | LF1500A | LF2000A | LF3000A |
| Volume of mixing barrel (L) | 300 | 500 | 1000 | 1500 | 2000 | 3000 |
| Max. charge volume (L) | 240 | 400 | 800 | 1200 | 1600 | 2400 |
| Max. charge weight (kgs) | 150 | 250 | 500 | 750 | 1000 | 1500 |
| Main shaft speed (rpm) | 14 | 13 | 12 | 10 | 10 | 8 |
| Motor power (kw) | 1.5 | 2.2 | 4 | 5.5 | 7.5 | 11 |
| Weight of whole machine (kg) | 600 | 750 | 1200 | 1650 | 2000 | 3000 |
| Overall dimension (dynamic)
(L x W x H) (mm) |
1850x1280x1980 | 2200x1530x2220 | 2800x2000x2820 | 2980x2330x3070 | 3300x2550x3280 | 3800x3000x3800 |
Related Products
-
VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
BGB Film Coating Machine
The BGB Series film coating machine is high-efficiency, energy saving, safe, clean, computer-controlled and easy-to-use equipment which is used for coating organic film, water soluble film, sow and release film in traditional Chinese and Western tablets and pills (including small pills) and granulated and conforms to the requirement of GMP.
-
ZP7/9/12/15 Rotary Tablet Press
ZP7/9/12 rotary tablet press is mainly applicable for trial production in labs and small-scale production and they are automatic equipment continuously pressing particles into round and special-shaped tables with diameters no more than 13mm.
This machine is a new generation product of our factory, and it is a continuous and automatic rotary tablet press for pressing various kinds of different shape tablets and also plain tablets. It is mainly used in pharmaceutical industry and the chemical, food, plastics, powder, metallurgy and electronic industries.
Reviews
There are no reviews yet.