SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
- Features:
Easy to operate and adjust,well selectivity. Can extract out requested component according to control pressure and temperature.
Low operating temperature. Operation often happen under room temperature, which is much better for Heat-sensitive Materials. Because during extraction process, it has avoid “when oxygen oxygenation” and “when light reaction”, product can keep its natural tastes.
Finish within one step, CO2 won’t be left on the products,CO2 is one kind gas of non-poisonous, tasteless, inflammable, cheap and can be cycle use.
CO2 can be recycled, and be equipped with return circuit which saves gas.Adopt new methods of fluid distribution uniform fluid distribution, which makes CO2 fluid and solute uniform contact to speed up the dissolved, shorten extraction time, increase production
Each kettle has function of measuring and controlling temperature system, which can effectively and accuracy control the temperature.
The safety valve can protect the safety of the machine and operator, and the pressure safety display to ensure that the machine working in a safe environment
High precision pressure valve to ensure the tightness of the machine,make good extract effect.
- Technical Parameters:
| Model | SH120-50-01 |
| Max. extract pressure | 50MPa |
| Single extract cylinder volume | 1L |
| Extraction temperature | Room temp – 75℃ |
| Max. flow | 0-50L/h(adjustable) |
| Kettle material | 1Cr18Ni9Ti |
| Separation kettle volume | 600ml * 2sets |
| Separation kettle pressure | 30MPa |
| CO2 store tank volume | 3L |
| CO2 store tank pressure | 16MPa |
| Dimension | 1700*1520*1000mm |
| Weight | 300KG(Approximate) |
Related Products
-
ZPW21A Series Rotary Tablet Press
This machine is applied to press all kinds of particle material into tablets and its greatest advantage is that it can press special-shaped tablets in all geometric shapes, double tablets, ring table’s and tablets with figures at both sides besides round tablets. Turret may be mounted with 21 pair of movable dies, so 21 tablets can be pressed at one turn. It is allowed to adjust the turret speed, stuffing depth of material and thickness of tablets during pressing and sample of tablets can be selected and examined. Pressure to pressing tablets is set by hydraulic system; to shish pressure gauge indication is attached. Overload protective device is mounted inside the hydraulic system and the system sill automatically stops when overloaded. Separate powder-absorbing box is supplied with the machine. It may absorb the powder from the operation of the machine to avoid bonding and clogging of powder and to recover raw material for refuse. This machine is a new type developed by ourselves during 1980’s and has been sold to international market.
-
VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
-
LF Series Square Cone Mixing Machine
The LF series square cone mixing machine is a novel material mixer extensively used in the pharmaceutical, chemical, metallurgical, food, light and feed industries. This machine can mix powder or granules very evenly so that the mixed material can meet best effect.
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
Reviews
There are no reviews yet.