VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
Technical Parameters:
| Type | Barrel Capacity (L) | Feed Volume coefficient | Max Feed weight (KG) | Agitation speed | Mix with time (min) | Motor Power (kw) |
| VH-5 | 5 | 0.4 | 1.5 | 60 | 6-8 | 0.25 |
| VH-8 | 8 | 0.4 | 2.5 | 60 | 6-8 | 0.25 |
| VH-14 | 14 | 0.4 | 4 | 46 | 6-8 | 0.37 |
| VH-100 | 100 | 0.4 | 28 | 15 | 6-8 | 1.1 |
| VH-200 | 200 | 0.4 | 55 | 12 | 6-8 | 1.5 |
| VH-300 | 300 | 0.4 | 80 | 12 | 6-10 | 1.5 |
| VH-500 | 500 | 0.4 | 140 | 12 | 6-10 | 2.2 |
Related Products
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
-
YK Series Granulating Machine
This machine can make granules from wet powder materials or break down the dry lumpish material, which is widely used by the industries of pharmacy, chemical, and food stuff etc.
-
FZ150 Series Grinding and Granulating Machine
FZ series grinding and granulating machine is used in pharmaceutical, food, fine chemical processing industries. This machine reaches the world advanced level and conforms to the GMP specification. It is completely made of stainless steel material.
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
Reviews
There are no reviews yet.