VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
Technical Parameters:
| Type | Barrel Capacity (L) | Feed Volume coefficient | Max Feed weight (KG) | Agitation speed | Mix with time (min) | Motor Power (kw) |
| VH-5 | 5 | 0.4 | 1.5 | 60 | 6-8 | 0.25 |
| VH-8 | 8 | 0.4 | 2.5 | 60 | 6-8 | 0.25 |
| VH-14 | 14 | 0.4 | 4 | 46 | 6-8 | 0.37 |
| VH-100 | 100 | 0.4 | 28 | 15 | 6-8 | 1.1 |
| VH-200 | 200 | 0.4 | 55 | 12 | 6-8 | 1.5 |
| VH-300 | 300 | 0.4 | 80 | 12 | 6-10 | 1.5 |
| VH-500 | 500 | 0.4 | 140 | 12 | 6-10 | 2.2 |
Related Products
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
-
CGN208D Semi Automatic Capsule Filling Machine
Integrating machine, electricity and air, it adopts micro-computer PLC control with touch screen panel operation, it adjuststhe speed by frequency conversion, equipped with electric auto counting device to complete the placing, separating, filling and
locking for capsule respectively So it can decrease the working intensity and increase the working efficiency, this kind of machines meet the requirement of pharmaceutical sanitary, it is suitable for filling powder and granular material in pharmacy and health food industry into capsule -
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
ZPW21A Series Rotary Tablet Press
This machine is applied to press all kinds of particle material into tablets and its greatest advantage is that it can press special-shaped tablets in all geometric shapes, double tablets, ring table’s and tablets with figures at both sides besides round tablets. Turret may be mounted with 21 pair of movable dies, so 21 tablets can be pressed at one turn. It is allowed to adjust the turret speed, stuffing depth of material and thickness of tablets during pressing and sample of tablets can be selected and examined. Pressure to pressing tablets is set by hydraulic system; to shish pressure gauge indication is attached. Overload protective device is mounted inside the hydraulic system and the system sill automatically stops when overloaded. Separate powder-absorbing box is supplied with the machine. It may absorb the powder from the operation of the machine to avoid bonding and clogging of powder and to recover raw material for refuse. This machine is a new type developed by ourselves during 1980’s and has been sold to international market.
Reviews
There are no reviews yet.