BCM Series Biological Clean Bench
Biological clean bench is necessary for cell tissue culture in the fields of medicine, biological engineering and scientific lab.
Characteristics:
Biological clean bench is necessary for cell tissue culture in the fields of medicine, biological engineering and scientific lab.
Main characters:
*Collocation for biological operation:
Equipped with discharge interface on the button, and equipped with high effective filter on air outlet.
*Circulated air flow design, when working area supplies fresh air, some return air will be discharge from top.
* Equipped with spring up/down movable door in the front and back of work bench, flexible and convenient to locate.
* Air insulation design to avoid cross pollution inside and outside.
* Equipped with 2kw spare socket to convenient for operator.
Parameter:
| Parameter/Model | BCM-1000 or 1300 |
| Clean grade | ISO5 (class 100) |
| Number of bacteria | ≤0.5 piece per utensil.hour (Φ90mm utensil) |
| Average wind speed | 0.25~0.45m/s (adjustable) |
| Exhaust volume | 2 m3/min or 3 m3/min |
| Noise | ≤62dB (A) |
| Half peak value of shaking | ≤5μm |
| Illumination | ≥300Lx |
| Power supply | AC, single phase 220V/50Hz |
| Max. power consumption | 0.8kw |
| Weight | 300kg or 340kg |
| Dimension (W1: width of working area) | 1000mm or 1300mm |
| Dimension (D1: depth of working area) | 700mm |
| Dimension (H1: height of working area) | 620mm |
| Dimension (W: width of exterior) | 1160mm or 1460mm |
| Dimension (D: depth of exterior) | 760mm |
| Dimension (H: height of exterior) | 1780mm |
| Specification and number of air supply filter | 915*610*50 or 1220*610*50 |
| Specification and number of air discharge filter | 610*90*50 or 610*150*50 |
| Specification and number of light from firefly/ultraviolet light | 20W /20W |
Related Products
-
Hinged doors
Flush-fitting hinged door system on 45-50 mm thick partition wall.
Consisting of extruded aluminum frame and a panel made with the same as the partition walls material, allowing total flush-fitting between the components and the wall itself.The inside of the ultra-med perimeter frame integrates all interlocking accessories (access control, electric locks).
The interconnection systems guarantee total flush-fitting between the door and the walls.
-
LED Lighting Systems
The lighting fixtures installed on clip-in ceilings are positioned on the same structure, then sealed with neutral white silicone on the clean room side, along the entire perimeter of the lamp. The lighting fixture is mechanically locked by steel edges, to guarantee an absolutely firm position and resistance to overpressure.
Housing steel sheet epoxy polyester powder coated in white color RAL9016, high quality Opal diffuser increases light transmission and eliminate the pixelization.
Diffuser is placed on a single die-cast aluminum frame which looks aesthetically good without any joint marks.
Wattage: 36W / 40W / 72W / 80W
CCT: 3000K / 4000K / 5700K / 6000K
CRI: >80
LED Life: 50,000 hours
-
Air Shower
This is a kind of local purifying equipment, fixed on the partition between clean room and unclean room. It is used for shower and removing dust when personnel or objects entering into clean area. Effectively reduce dust source from entering into clean area after used, and keep clean area in normal working state. Shower way: single-side shower, double-side shower, three-side shower, top shower
-
Clip-in Ceiling System
ultra-med offers a variety of ceiling systems. All systems are absolutely flush in combination with a low portion of joints. They correspond to the system requirements described by GMP & FDA.
The systems are available as walk-on or non-walk-on versions. The panels are sealed or there are used dry gaskets. For every ceiling system ultra-med offers appropriate standard components like luminaires, filter/fan modules or inspection chambers. The systems are modular so dismantling and reassembly can be carried out at any time
ultra-med Clip-In ceiling system has a beveled edge to form visually closed joints. The 4.2 mm bevel will emphasize the crispness of the tile ceiling design with fine joint lines.
ultra-med Clip-In ceiling system are made of 0.6 mm thick Galvanized steel or Aluminum in powder coated with standard color RAL 9010.
ultra-med Clip-In ceiling system are available in a wide variety of pre-defined rectangular module sizes that are commonly used in ceiling design.
Ceiling Tile Size (mm) Side Height (mm) Thickness (mm) 300 x 300 20/25 0.5-1 300 x 600 20/25 0.6-1 300 x 1200 20/25 0.7-1 400 x 400 20 0.6-1 500 x 500 20 0.6-1 600 x 600 20/25/28 0.6-1.2 600 x 1200 20/25/28 0.7-1.2
Reviews
There are no reviews yet.