VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
Technical Parameters:
| Type | Barrel Capacity (L) | Feed Volume coefficient | Max Feed weight (KG) | Agitation speed | Mix with time (min) | Motor Power (kw) |
| VH-5 | 5 | 0.4 | 1.5 | 60 | 6-8 | 0.25 |
| VH-8 | 8 | 0.4 | 2.5 | 60 | 6-8 | 0.25 |
| VH-14 | 14 | 0.4 | 4 | 46 | 6-8 | 0.37 |
| VH-100 | 100 | 0.4 | 28 | 15 | 6-8 | 1.1 |
| VH-200 | 200 | 0.4 | 55 | 12 | 6-8 | 1.5 |
| VH-300 | 300 | 0.4 | 80 | 12 | 6-10 | 1.5 |
| VH-500 | 500 | 0.4 | 140 | 12 | 6-10 | 2.2 |
Related Products
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
ZP7/9/12/15 Rotary Tablet Press
ZP7/9/12 rotary tablet press is mainly applicable for trial production in labs and small-scale production and they are automatic equipment continuously pressing particles into round and special-shaped tables with diameters no more than 13mm.
This machine is a new generation product of our factory, and it is a continuous and automatic rotary tablet press for pressing various kinds of different shape tablets and also plain tablets. It is mainly used in pharmaceutical industry and the chemical, food, plastics, powder, metallurgy and electronic industries.
-
BGB Film Coating Machine
The BGB Series film coating machine is high-efficiency, energy saving, safe, clean, computer-controlled and easy-to-use equipment which is used for coating organic film, water soluble film, sow and release film in traditional Chinese and Western tablets and pills (including small pills) and granulated and conforms to the requirement of GMP.
-
Soft Tube Filling and Sealing Machine
This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It’s ideal equipment for plumbum tube, ALU tube, plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.
Reviews
There are no reviews yet.