-
LGSZ Series Filling Stoppering Capping Machine
Introduction: This machine is applied for 30-300 ml glass and plastic bottles. It has filling and stoppering and capping function integrated. Adopted linear type filling; mechanic way to stoppering; cap putting and clamp or screw capping.This machine is easy to operate and maintain. It can be connected to other machine for combined whole production line. Technical Parameter: Applied for 30-400ml…
-
LPH-250 High Speed Blister Packing Machine
LPH-250 High-speed Automatic Blister Packing Machine is a high-tech blister packing equipment which has gained two advanced patented technologies. It has been rewarded as the provincial scientific and technological achievement product. Its punch frequency is as high as 60-160 times/minute, thus gains a high productive capacity. With higher efficiency and lower cost, this machine provides a new choice for medicine packing in pharmaceutical industry.
-
NJP Full Auto Capsule Filling Machine
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopts optimization design combined the characteristics of Chinese medicine and requirements of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine, it increase the lifting mechanism that easy to clean, it saves the cost and manpower for the enterprise that need volume-produce
-
SGS-600 Intelligent High Effect Mixer and Granulator
Pharmaceutical industry-tablet, capsule electuary
Ceramic, Chemical, Cosmetics and Plastics Industries.
Food Industry
-
SH120-50-01 CO2 Supercritical Extraction Machine
The technology of SFE(Supercritical Fluid Extraction) is a new subject from Modern Chemicals Industries, which is one of the advanced Separation Technology. As for SCF(Supercritical Fluid), it is was that fluid on Critical Point(Pc, Tc) under Thermodynamic State, the Critical Point is the state point when interface of Gas and Liquid disappear, which process very novel physical& chemical characters. It density degree close to liquid, viscosity degree close to gas, but bigger diffusion coefficient &dielectric constant, smaller viscosity etc. these characters have contributed to good separation effects. So the SFE is mainly about Separation, the solution will touch with extracted materials under High Pressure& Suitable Temperature, the Solutes would be diffused into the solution, then change the operation Conditions, to make the Solutes separate out.
-
Soft Capsule Production Line
Soft Encapsulation Machine is the new product made up elaborately designed through combining the technology and characteristics of production by our company in accordance with the requirements of GMP. The entire equipment is in optimized design. The power source adopted for HSR-100 soft encapsulation machine is AC220V of single phase; its operation is simple and easy. The equipment is applicable mainly to small batch production and trial manufacture of soft capsules for labs and scientific research organizations.
-
Soft Tube Filling and Sealing Machine
This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It’s ideal equipment for plumbum tube, ALU tube, plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.
-
SPF Semi Auto Powder Filling Machine
SPF semi auto powder filling machine can weight and fill automatically. Electric sensor control weight feedback, we don’t limit the package container. It is for the situation that the materials and package weight standards often changed. It has the characteristic of high precision, high speed, great torque and long life. LED simply visual supervisory, easy operator. All parameters can adjust, formula can be memorized, you can memorize 10 at most. Composite type material box, easy to take down for clean and need no tools.
-
TB 350 Automatic Cellophone Over-Wrapping Machine
Applications: The machine can be used to pack single or multiple medicine box, tobacco, food and with BOPP or PVC film. The max speed is 30 packs /min. It can finish all actions automatically like stuff-stacking, feeding, packing film feeding, folding, packing, heat-sealing and so on. The machine uses mechanical transmission, frequency convert, HMI and PLC to control. The malfunction…
-
TDP-1.5/5/6 Single Punch Tablet Press
This machine is designed for pressing round tablets from various granular materials, applicable to be used for research and development and to small scale production. As its feature, it is an all desk-top continuous press driven by motor or man power. Only one set of punch and die is mounted. The depth of the filling material and the thickness of the tablets can be adjusted.
-
VH Series Mixer
This machine has the following distinguishing features, no blind eagle in the cylinders, and no accumulation of materials, high speed, and short mixing time. With the body made of stainless steel and both inner and outer walls polished, the cylinders have elegant appearance. The charging of materials can be made either by manual operation or through vacuum suction. For discharging, rotating valves and rapid swivel heads are adopted. This mixer is applicable for mixing powdery or granular materials in pharmaceutical and other industries. It consists of two V-type cylinders of different altitudes, and through mechanical transmission the materials in these cylinders are made to move back and forth and turn over again and again, thereby achieving the goal of uniform mixing.
-
Vials Filling Production Line
Vial injection filling production line project (GMP) is a kind of screw type sterile vial powder filling machine our company has newly developed. It adopts two track, cylinder positioning,2 head screw filling and 2 roller stoppering. The servo motor controls the filling auger precisely. Corporation standardization number no:q/tgb04-2006.
